Operation cautions of new forced concrete mixer

joanna's Avatar

joanna

20 Apr, 2015 09:51 AM

What should we specially notice is the gap between the mixing blade and the stirring barrel bottom of concrete mixer, we should always check whether it meet the requirements. When the clearance exceeds the standard, will make the cylinder wall and the cylinder bottom adhesive residue layer too thick brick making machine, add cleaning difficulties and reduce the mixing efficiency, such as stirring blade wear, timely adjust SICOMA concrete mixer, repair or replacement.The new forced concrete mixer operating instructions:

Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows:concrete batching plant,concrete mixing plant,mobile concrete mixer,etc. We will provide you with the best product and service.

1:before start the forced concrete mixer, check whether there is a rotating part and a barrel collision phenomenon, such as collision, which should be timely adjusted.

2:reducer should be injected into the oil before using, discharging gear and sliding bearing is also should be infused oil.

3:clean the miscellaneous materials in barrel, the cylinder spacing device is locked, and then start the machine, as in a start after the discovery of the running direction does not meet the requirements, should be promptly cut off the power supply, will lead the arbitrary two phase exchange position, and then restart.

4:put concrete mixture into the barrel, close the cylinder cover, adjust the timing of relay according to the stirring time (cut off the power when adjusting).

5:start the motor, the spindle drives the stirring shovel operation, reaches the set time automatic parking.

6:when discharging to stop, and then will be expected to handle undo postural constraints, and then rotating the hand wheel, composed of a worm wheel drives the barrel is rotated to facilitate discharge position, stops rotating, and then start the machine so that the running of the spindle can be discharged from the materials, until the material discharge clean stop running of the spindle mobile hallow brick making machine, rotating the hand wheel makes the material barrel reset.

7:clean barrel of forced concrete mixer machine, you can use either water or sand to clean the carrel.

SICOMA concrete mixer:http://www.beton-mixer.com/products/concrete-mixer/diesel-concrete-mixers.html
concrete batching plant:http://www.dwmixers.com
concrete mixing plant:http://www.dwmixers.com/products/concrete-batching-plant/stationary-concrete-batching-plant.html
mobile hallow brick making machine:http://www.blockmakingmachinery.org/products/DMBE-6A-Mobile-Block-Making-Machine.html

Reply to this discussion

Internal reply

Formatting help / Preview (switch to plain text) No formatting (switch to Markdown)

Attaching KB article:

»

Attached Files

You can attach files up to 10MB

If you don't have an account yet, we need to confirm you're human and not a machine trying to post spam.

Keyboard shortcuts

Generic

? Show this help
ESC Blurs the current field

Comment Form

r Focus the comment reply box
^ + ↩ Submit the comment

You can use Command ⌘ instead of Control ^ on Mac